Request a Quote Now

• Our coatings are very high polymer solids formulations (compared to other manufacturing companies) this gives the coatings extra durability, longer lasting with high UV resistance etc.
• Contains NO Inert fillers on TOP COATS They are manufactured using Australian made polymers (where possible), giving long lasting protection in the harsh Australian climate.
• Better pigmentation system using the latest technology with very high quality organic tints that are burnt oxides from the ground This results in consistent, highly pigmented colours with high UV resistance. We use organic oxides (from the ground) in our formulations, ensuring a better quality material which helps to stop fading.

Application Methods

1. Thoroughly clean the tiles using industrial pressure cleaner (3500 – 4500 psi.)
2. Flexi-point ridge capping and replace broken tiles

Suntuff Coatings Tile Paint is designed to be applied using an airless spray system or similar. The coating system has been developed to be easy to use and to provide long lasting colour, gloss and protection to the roof. The drying time will vary depending on the weather conditions and on the heaviness of the coating being applied. A three to six coat system is recommended. We recommend using a 6/23 to 6/27 spray tip for best results for tiles, as this is an industrial/commercial grade paint.

Application Process

First Coat: CT Primer (Tile Roofs)

1 x Fungicide/pre treatment to stop fungi growing through the new paint job.

1 x CT Primer is a high build undercoat. Its function is to penetrate into and seal the roof surface providing a sound surface for the next coat to bond to

.1 x High build filler or Base coat for badly worn tiles

First coat for metal roofs

1 x Metal Primer is a high build anticorrosive undercoat or EP primer for colourbond roofs.

Its function is to chemically bond to and protect the roof surface. The anticorrosive pigments in the metal primer prevent corrosion of the metal taking place underneath the paint film. Metal primer and EP Primer has been formulated to provide exceptional adhesion using Nano Technology and allows it to stick to the metal roof and not come off

Colour Coats

2 x coats of Ultrashield, Dirtshield or Thermal coating in your chosen colour.

Two colour coats provides a high film build for extra durability and longer lasting protection.

All coatings are durable, tough coating with exceptional UV resistance and proven performance in harsh climates.

Final Coat is for Extra Protection

1x coat of Nano Glaze to help reduce fading (by 5 – 6 years)

Nano Glaze is a clear protective glaze for enhanced gloss and UV resistance. An extra layer of protection to extend the life of your investment.

A low sheen version of the Nano Glaze is available for metal roofs to restore the original Colorbond look.

Suntuff Protective Coatings Australia © 2023